By linksysextendersetupdotcom on April 19, 2023 0 Comments • Tags: #linksysvelopdisconnectsfrequently #linksysvelopdropsconnectionfrequently

Linksys Velop Disconnecting

How to Fix Linksys Velop Dropping Internet Connection?

Is your Linksys velop disconnecting frequently? Well, that is a serious issue! However, you don’t need to panic as it is fixable. When Linksys Velop drops internet connection, it means something is not right with the router’s network or the whole WiFi setup. 

In this case, you first need to identify the root cause of the Linksys Velop dropping connection. Once you get to know about it, it will be pretty easy for you to choose the right troubleshooting steps. In this post, we will first help you learn about the potential reasons behind Linksys Velop disconnecting frequently. 

Let’s start with the Linksys velop troubleshooting guide right away.

Why is Linksys Velop Disconnecting Frequently?

If you want to fix the frequent disconnection issue on your device, you must understand the causes of the issue. Here are some potential causes of Linksys Velop dropping connection:

  1. Secondary Velop nodes placed too far away
  2. Outdated or corrupted firmware 
  3. Velop not set up correctly
  4. Power supply issues 
  5. Interference due to other WiFi devices nearby

Troubleshooting the Linksys Velop Drops Internet

In this section, you will walk through the troubleshooting steps to fix the Linksys Velop disconnecting frequently issue. Make sure you follow these steps very carefully.

1. Restart the Velop System

First of all, you must reboot your Velop WiFi system. To reboot your Velop system, you can either use the Velop app. Apart from this, you can manually turn Off the device and then wait for a few seconds before turning it On. If you still observe your Linksys Velop dropping connection, go to the next step. 

2. Inspect the Power Supply

Double-check that your Velop router and secondary nodes are supplied adequate power. Kindly make sure the power outlet in which your Velop is plugged in is working properly. You may use any other power outlet if it is not working properly. Still, if Linksys Velop drops internet connection, go to the next step. 

3. Eliminate the WiFi Interference

Kindly ensure that there are no other WiFi devices surrounding your Velop router or secondary Velop nodes. If your router or secondary nodes are surrounded by WiFi gadgets, devices, or appliances, kindly relocate that particular node or router. It would be better if you place your main router and secondary nodes at least 4 feet above the ground level. 

4. Provide the Stable WiFi Connection

Ensure that the secondary Velop nodes are well within the range of the main Velop router. If you see your Linksys Velop disconnecting frequently, kindly relocate the router or the secondary nodes. Bring your secondary nodes a little closer to the main router. 

5. Check the Configuration

Login to the Linksys Velop router and make sure the configuration is done properly. You must set up your device correctly in order to avoid facing any future issue. Make sure the VPN or any other service is disabled on your network.

6. Update the Velop Firmware

If the Linksys Velop drops internet connection even now, you must look for the firmware updates on your device. Login to the Linksys Velop and check for the latest updates. If the latest firmware update is available on your device, make sure you follow the in-app prompts to initiate the upgrade. 

7. Reset the Linksys Velop

If you still find your Linksys Velop dropping connection, kindly reset your device to the factory default settings. You can use the Velop app to restore the factory default settings on your Linksys Velop router. Once you reset your device, you must reconfigure it using the same mobile app. 

Finally, the Linksys Velop disconnecting frequently issue will be resolved in no time. Moreover, your Velop WiFi system will start working as usual. 

Final thoughts

This post was all about the Linksys Velop dropping connection. We discussed the main causes of Linksys Velop disconnecting frequently. If your Linksys Velop drops internet connection every now and again, you must reboot it and follow the troubleshooting steps. If your device does not work even after following the troubleshooting steps, make sure you reset the device and reconfigure it using the Velop app. 

We hope that this post helped you learn how to fix the frequent disconnection issue on your Linksys Velop WiFi system. If you still come across any issues or queries, kindly feel free to reach out to our support team for more help.  

Leave a comment

Your email address will not be published. Required fields are marked *