How to Fix Linksys Velop Red Light?
Generally, the Linksys Velop mesh system is a preferred networking gadget among users. Like other mesh systems, it also includes LEDs that refer to different meanings. Similarly, sometimes these lights alert you about issues with your router, such as Linksys Velop red light. Additionally, this red light on the mesh system is present in blinking for or in the solid that refers to the different meanings.
Moreover, the Linksys Velop blinking red light points out that the Velop parent node is not connected to the modem or the child node gets disconnected from the network. Similarly, the solid red light represents that there is no internet on your networking device which happens due to various reasons. So, it is essential to understand the causes of the red light on the Velop mesh and then go to the solutions.
Further, in this blog post, we explore the reasons behind the red light on Linksys Velop. Also, to assist you, the quick and easy troubleshooting methods are also explained here. If you want to know more about the red light error, stay in touch with this post:
Why Does Linksys Velop Red Light Appear?
As discussed above, the red light on the Velop mesh occurs as blinking or solid due to different reasons. So, here we consider the primary root causes for the Linksys Velop red light no internet. Let’s have a look:
- Network issues from the ISP side
- Loose or damaged network cables
- Ethernet cable is not connected to the modem
- Automatic WAN port detection is disabled on the WAN port after setup
- Inappropriate nodes placement
- Firmware issues
- Misconfigured router settings
Quick Fixes to Linksys Velop Red Light Issue
Additionally, you understand the reasons behind the Linksys Velop red light, so you can pick the relevant solution to the error. Similarly, in this section, we throw light on the primary troubleshooting methods for resolving the Velop red light issue. Let’s take a look:
1. Check the network cable connections
The primary reason is the loose cable connections for this issue, so tighten the Ethernet cables first. Next, confirm that there is no damaged or toggled cable present. Connect the networking wires properly to the modem and Velop nodes.
2. Enable the WAN port detection
As per the alerts firmware update, it is necessary to enable the auto-detect WAN port on your Velop system. For this, access the login page and enable this function by visiting the settings.
3. Place the child nodes within the router range
If the child nodes are placed far away from the parent node/router, then the Linksys Velop blinking red light issue occurs. So, relocate the nodes closer to each other.
4. Fix the Firmware issues
Sometimes there is no network due to outdated firmware or corrupted firmware files. To resolve this, upgrade the firmware version on your router manually. Also, delete the corrupted file and download the latest one as per the router model you use. If you still have issues, then get in touch with us.
5. Power cycle the Velop
Occasionally there are technical glitches or bugs on the networking device or it is accumulated with the temp files. Hence, power cycling the router is the best way to resolve these issues. For this, plug out the parent node, and computer (if connected), then mode and wait for 30 seconds. Again plug back the devices as you remove them.
6. Check network settings on your Velop
If you misconfigure the wifi settings, ports, or channel settings, then a solid red light appears that shows no internet on the Velop. So, you have to change the settings on the router first and reboot it.
7. Contact ISP
Sometimes there is no network on the Velop due to the ISP’s local area network management and it highlights the red LED. So, it is necessary to contact the relevant authority and fix the issue or get an update about it.
8. Factory reset the Velop
If nothing else works, then a hard reset is the last option to fix the Linksys Velop red light no internet. For this, locate the reset button on the parent node, press it for 10-15 seconds, and release it when the LED turns out and turns bright red again. Here, your router turns back to default settings and you have to reconfigure it.
Bottom Line
All in all, the above-mentioned information will assist you with suitable solutions to fix the Linksys Velop red light easily. Additionally, you can walk through the complete post to understand the reasons for this error and to find the relatable fix-outs.
If you are still seeking more help, then stay in touch with us.