By linksysextendersetupdotcom on January 3, 2023 0 Comments • Tags: #linksysblinkinggreenlight #linksysextenderflashinggreen #linksyswifirangeextendergreen

Linksys Extender Blinking Green

Linksys extender blinking green light does not indicate any serious issue. However, if you see your Linksys extender blinking green, you should wait for a few seconds before starting with the troubleshooting steps. Sometimes, the green light on your range extender goes off automatically, but if it does not, it’s time for performing some effective troubleshooting steps.

The Linksys extender comes with an LED light that blinks in different colors and these colors indicate the different issues and status of your device or network. So why does a Linksys range extender blinking green light issue occur? Well, if you see a green light on your device, it means that your Linksys WiFi extender is sending or receiving data through the internet port.

Generally, this occurs when you reboot your Linksys extender but the LED light on your device becomes solid green. There could be more reasons behind the extender blinking green light issue. So first, we will start with the causes of the green light on your device and then we will proceed with the troubleshooting steps.

Why is My Linksys Extender Blinking Green?

If you notice your Linksys WiFi extender blinking green light, there could be multiple reasons behind this issue. In this section, we have put down some of the most common causes of Linksys range extender blinking green light.

Network connection

A faulty connection on your network is the main reason why this could be happening. If the extender is placed far away from the existing router, the green light may show up on your device.

Wifi Configuration

WiFi configuration plays an important role in the optimized working of your device. If the device has not been set up accurately, you will see your Linksys extender blinking green.

Firmware

The third most common reason is faulty or corrupt firmware of your range extender. If the firmware of your extender has not been updated in the past few weeks or months, you are sure to come across the green light on your Linksys WiFi range extender.

Troubleshooting Linksys Wifi Range Extender Blinking Green

Finally, we will start with the troubleshooting guide once you understand the causes of the extender blinking green light issue. Here are the steps to fix the green light on your range extender.

Resolve the physical connection issues

  • Firstly, you need to cross-check the physical connections associated with the Linksys WiFi extender. 
  • Make sure you give special attention to all the cables and wires running in the physical setup. 
  • If you get confused, you can refer to the product manual to understand the right sequence of connections and ports. 
  • After that, kindly ensure that the cables and wires are firmly plugged into the respective ports in the Linksys extender physical setup. 
  • You can also consider disconnecting all the cables, turning Off all the devices, and then reconnecting the cables to the respective ports or devices.

Linksys extender network settings

  • The WiFi settings of your Linksys WiFi range extender play an imperative role in the proper working of your device. 
  • If you see the Linksys WiFi extender blinks green light, it means the WiFi settings of your device are compromised. 
  • Make sure you verify the WiFi settings of your Linksys range extender. You should check the SSID and WiFi password of your device. 
  • In case you are using the default credentials of your Linksys extender, make sure you change them as soon as possible.

Update Linksys extender firmware

  • As already discussed, faulty or corrupt firmware is the main culprit behind the Linksys range extender blinking green light. 
  • In this case, you need to check for the latest firmware updates on your Linksys range extender. 
  • Login to the Linksys extender using the default web address extender.linksys.com
  • Go to the Firmware Update page and check for the latest firmware updates. 
  • If you still see your Linksys extender blinking green light, go to the next step. 

Reset your Linksys extender

  • Finally, you need to reset your Linksys extender to the factory default settings. 
  • Press and hold the reset button of your Linksys range extender. 
  • Make sure you hold your extender’s reset button for a good 10 seconds. 
  • Once the device reboots, it means the device is reset to the factory default settings. 
  • At last, you need to reconfigure your device.

Finally, the Linksys WiFi extender blinking green light issue will be resolved. To re-configure the device, you can use the default web address extender.linksys.com. Make sure you remember the default login credentials of your device in order to login and configure the WiFi settings.

NOTE: If you don’t know the default Linksys extender login credentials, kindly refer to the product manual or the wireless label on your device.

Bottom Line

The Linksys extender blinking green light is not a serious issue and can be resolved with the help of effective tips and tricks. We hope this page helped you learn how to get rid of the green light on your Linksys wireless range extender.

If you have any doubts or queries, kindly get in touch with our support team for further assistance. 

Leave a comment

Your email address will not be published. Required fields are marked *