Linksys RE6500 Setup

In today’s digitally interconnected era, a reliable and strong internet connection is a must to experience high-speed, seamless internet 24/7. The Linksys wifi routers & extenders do it effectively, but you need to perform the Linksys RE6500 setup first, which does not require any technical expertise.

However, you do it by yourself and you do this detailed guide, we provide you with in-depth details regarding how to configure Linksys RE6500 extender. Additionally, this page highlights the key issues and troubleshooting tips to avoid the common issues occurring during this process. So, let’s have a blink on the complete details.

Necessities for Linksys RE6500 Configuration

To successfully carry out the Linksys range extender RE6500 setup process, you need to be ready with these essential things:

internet
connection

web/
IP address

Admin
credentials

Linksys
app

Computer/
SmartPhone

Ethernet
Cables

How to Setup Linksys RE6500 WiFi Extender?

Generally, the Linksys extenders are set up by following a sequence of steps. The three main methods to carry out this process include the WPS button, the Linksys app, and the web GUI.

Moreover, to begin with the setup procedure, you need to power on the Linksys RE6500 and the WiFi router. Further, for the complete stepwise process, follow the below-mentioned steps:

Extender.linksys.com RE6500 Configuration

First and foremost, place the router and extender closer to each other.
Now, connect your computer to the extender’s network.
Further, open your web browser and enter the ‘extender.linksys.com’ web GUI.
Instead, use the 1921.168.1.1 default IP address.
Now, you’ll see the login page of your Linksys extender.
Enter your default admin credentials and complete the login process.
Then, you reach the smart setup wizard of the Linksys extender.
Furthermore, visit the Basic Settings to change the SSID and password.
Now, set a complex and strong SSID and password.
Moreover, you can also configure the Advanced settings like Parental Control, Guest Network, Bridge mode, etc. accordingly.
Finally, click on Save/Apply to save and execute these modified settings.

WPS Button Method for Linksys RE6500 Configuration

Initially, ensure that the Linksys extender has sufficient power supply.
Now, place the primary router and the wifi extender closer to each other.
Then, find the WPS button on the Linksys extender’s back side.
Simultaneously, locate & push down the WPS button on the router & extender within 2 minutes.
Wait till the LED on your extender starts flashing and turns solid.
Now, release the WPS knob button.
With this, the extender setup procedure is completed.
Now, check the Linksys extender’s name on the WiFi list.
Afterward, open your web browser to configure your extender accordingly.
Lastly, complete the Linksys RE6500 setup process accordingly by following the on-screen instructions.

Linksys App Method to Perform Linksys Extender Setup RE6500

Firstly, update or install the Linksys app on your smartphone.
Now, access your extender’s admin account by logging into the app.
Otherwise, create an account first by downloading the app, if you don’t have an existing account.
After login, visit the master setup wizard of the Linksys extender.
Visit the Basic/Advanced settings to configure them according to you.
You can change the SSID, Password, Guest Network, Parental Control, etc.
Lastly, tap Save/Apply to implement these changes.

Can't Setup Linksys RE6500 Range Extender? Try These Troubleshooting Tips!

Now that you’re well aware of the stepwise procedures for the Linksys RE6500 setup. Often, users come across some common issues including forgotten login credentials, outdated firmware, and many others.

In this section, we provide you with some effective tips to troubleshoot these issues. Let’s dive in!

Ensure that you have a stable internet connection and a good signal strength.
Confirm that all devices are receiving sufficient power supply.
Also, keep the router and extender in the same room or closer to each other.
Always verify the web address and IP address before accessing your account.
Use only an accurate username and password for login, double-check before entering.
Power cycle your device to avoid technical glitches and bugs.
Additionally, eliminates network interferences to experience exceptional network strength.
Ensure the regular firmware updates with the recent versions.
Verify that you have changed the network frequency from 5 GHz to 2.4 GHz.
Temporarily disable the VPN, firewall, and other security software during this process.
If all else fails, reset the extender to bring the device to its factory default settings.

If you have any further doubts, contact us!

FAQs

How to Reset Linksys RE6500 WiFi Range Extender?

To reset the Linksys RE6500 WiFi range extender, press and hold the reset button for 10 seconds. After that, release this button when the LED blinks and complete this procedure after the extender reboots.

Can I Access Linksys RE6500 as an Access Point?

Yes, you can access the RE6500 as an access point. For that, you need to visit the smart setup wizard of the extender to set it as AP.

How to Fix Linksys RE6500 Extender Blinking Orange?

If your extender shows an orange blink, it indicates that the range booster is not connected to the router or there is any error in the setup. To fix it, ensure to have a stable internet connection, or power cycle your device.

Why is My Linksys WiFi Extender RE6500 Blinking Red?

The Linksys WiFi Extender RE6500 blinks red when you have internet connectivity and power issues. To resolve this issue, check that your device has an adequate power supply and an internet connection.

Can I Access Linksys RE6500 Wireless Extender in Bridge Mode?

Yes, you can set up the Linksys RE6500 in the bridge mode by visiting the extender’s Advanced settings.