A Brief Guide to Fix Linksys Velop Purple Light Issue.
The impeccable network coverage and high-speed internet have enhanced the performance of the Linksys Velop, making it the topmost mesh system of all time. Among other significant features of Velop, the frequent and continuous blinking of LEDs sometimes indicates problems in the device and Linksys Velop purple light is one such type.
In this blog, we outline the issue of Linksys Velop node purple light, along with the meaning of this light behavior and its key reasons. Furthermore, troubleshooting options are also added to overcome this issue. Let’s have a look at all these details through this blog:
What Does Purple Light Mean on Linksys Velop Node?
The appearance of purple light on the Linksys Velop Node is not a big issue, instead, it is part of the router setup. Generally, the purple light on the Linksys Velop points out that the router is all set to be configured.
Despite this, sometimes users see this light continuously for a longer period, which may be a matter of concern. Therefore, to resolve this issue, it is important to understand the different light behaviors first. Let’s take a look at the behavior types of the purple LED:
Potential Reasons Behind Linksys Velop Purple Light
As defined earlier, the appearance of purple light on Linksys Velop is nothing serious, instead is a part of configuration. But various possible reasons give rise to this issue on Linksys Velop. Let’s uncover some of those reasons:
- Unstabilized or poor internet connection
- Weak signals
- Insufficient power sources
- Outdated firmware
- Loosened or Damaged Cables
- Network Interferences and Obstructions
- Distance between the nodes
- ISP issues
Fix Outs for Purple Light on Linksys Velop System
After exploring all the possible reasons for the Linksys Mesh purple light issue, now you must be curious to know how to fix this issue. Don’t worry, we’ve brought some of the most effective and best possible solutions to fix this issue. So, walk through the guide to learn about these fix-outs:
1. Ensure an Adequate Power Supply
The router and the modem should receive an adequate power source to ensure proper functioning. For this, properly plug the networking device into the electrical source and check if the power cable or adapters are not burnt or cracked.
2. Check Network and Cable Connections
If using wired network connections, it is important to check if the cables are working properly and connected well at both ends. Always check and replace the damaged, or defective cords.
3. Eliminate Network Interferences
Sometimes, obstructions and interferences such as mirrors, electromagnetic devices, furniture walls, etc. weaken the signal strength and connectivity issues. Therefore, remove these obstructions or relocate the device for better coverage.
4. Power Cycling
Technical glitches and bugs often cause certain issues with internet connectivity. Therefore, power cycling of the devices is an optimal solution for dealing with them. To power cycle your device, disconnect it from the modem for around 30 seconds and then reconnect it to the electrical source.
5. Contact your ISP
Sometimes users face issues due to poor or no internet connections. To resolve this problem, it is advisable to contact your ISP and follow the proper guidelines.
6. Place Child and Parent Nodes Closer
Moreover, closer placement of the child and parent nodes of the Velop router is essential during the configuration. If both nodes are far away from each other then it may cause several connectivity issues such as the Velop purple light issue.
7. Firmware Update
Outdated firmware occasionally becomes a key reason behind the Velop purple light issue. Therefore, the router’s firmware should be checked and upgraded timely by visiting the settings of your device. Ensure that you’ve installed and upgraded the latest available upgrades for the Velop firmware.
8. Reset the Velop
Resetting the Velop is the last option to get rid of the Velop purple light issue. You can do it by visiting the device settings or using the reset button. After resetting is done, you need to reconfigure your device according to your preferences.
On the Whole
In summary, this guide has enlightened the issue of Linksys Velop purple light in detail. This blog has also outlined the meaning of the blinking purple light on the Velop node and also unleashed potential reasons behind this issue. Additionally, some simple and effective troubleshooting methods are mentioned here to resolve this issue.
In case you still have any problem that bothers you, contact us!
Comments are closed.