The Linksys Wireless-N Range Extender N300 is a capable device and deserves to be in your home if you are looking to extend the wifi signals from your existing router. You can get connectivity in hard-to-reach areas using a wired or wireless connection. The wireless-N Linksys N300 Range Extender Setup can be configured for use easily. If you have recently purchased a new N300 extender, and need help with the network configuration part, this blog is all you need to read.

Methods for Linksys N300 Range Extender Setup

You can set up your Linksys range extender using simple steps in four different ways:

• Using the web browser
• Using the Linksys Connect Software
• Using the WPS feature
• Using the setup software on the CD

All of these methods can help you effectively access the internet once you have completed the steps for each. This would also require you to access the default login page first.

Linksys N300 Wifi Extender Login

Before you proceed with the setup process, you will need to arrange for certain details including-

• WiFi name and Password
• Default Login Settings of Extender
• Active internet connection

The default settings details for your N300 extender can be found on the product label pasted on the rear of the device. You can use the same to proceed with the extender login. Also, you’ll need to connect your smartphone or computer to the WiFi Extender network. You can do this using a Wired or Wireless Network. For a wired connection, you can use an ethernet cable between the Extender and the computer. Whereas, in the case of a wireless connection, you can use the WiFi feature on the device to establish a network connection. Once connected, you can proceed with the login process.

Default IP address/web address for N300 extender: 192.168.1.1/ extender.linksys.com

Default Admin Access Credentials: Leave the admin field blank and use admin in the password field.

Accessing the Linksys Wireless-n Range Extender N300 Login Page

• Connect your Extender to the power outlet near the main router. Turn on the power supply and allow some time for the device to boot up.
• Once the device is ready, use a wired or wireless connection to connect your smartphone/computer to its network.
• Now, open a web browser, and in the address bar, type http://extender.linksys.com and press Enter. You will now be redirected to the extender login page.
• Type in the default admin credentials in their respective fields and click on the Login button. You will now be logged into the extender setup wizard.

How to Install Linksys N300 Extender Without CD?

You can install your Linksys N300 extender without CD, using the web browser only. Once you are logged in to the setup wizard, you can follow the on-screen instructions to configure the network. Here are some steps you can follow:

• From the main Linksys extender setup screen, click on the Start button. Then, click on the “I agree” button on the License Agreement screen.
• The Linksys extender setup wizard will now start looking for the available wireless networks. Select the router’s wireless network name/SSID from the screen.
• The setup wizard will also tell you about the ideal location for your extender. You can relocate your Linksys Wireless-n Range Extender N300 based on the message that’s being displayed on the screen.
• Once the connection status turns ok, you can type in the password for your wireless network and click on the Next button to connect to it.
• Once the extender is connected to the main router network, you will see a confirmation message saying “Your Extender is Now Configured.”
• The extender will self-assign a network SSID and password to its network. You can edit these details later.

Editing the Network Settings

You can log back into the Linksys N300 Range Extender Setup wizard and head to the Wireless settings. Access the Internet Setup wizard and head to the Edit button next to the Network SSID and Password. Click on the same and then edit the same. Once you have edited the same, select the appropriate network encryption type and hit Next. Also, edit the network SSID and password for your 5GHz network band before saving. If the setup wizard asks you for the admin password, type in the same, and the changes will take effect.

Once you make the changes, your devices will be disconnected. You can add them back using the new password easily. Once added, you can relocate your extender to a location you prefer. Once that happens, you can start using the internet easily.

Troubleshooting Issues:

Linksys N300 Connected But No Internet- Fix

Whenever you face issues accessing the internet using your Linksys Wireless-n Range Extender N300, it means there is some issue with the internet settings you have edited. You can check for the wireless settings that are saved online and verify that these are correct. If you are still having issues connecting your device to the internet using your Linksys extender, you can use an alternative method to connect it to the main router network.

Why is Linksys N300 Wifi Extender Blinking Orange?

The LED on your Linksys N300 extender may blink orange due to wireless coverage issues. While the green light on your Linksys extender signifies a good signal, orange indicates that the signal quality is low and you must move your extender closer to the main router. Once you have moved the same closer to the main router, you can check the light on it. If the same has changed, you can proceed with connecting your devices to the network again.

How to Reset Linksys N300 Wifi Extender?

You can reset your Linksys Wireless-n Range Extender N300 Setup using the push-button method. Use the RESET button present on the device to reset the network settings to factory default. To proceed, you can follow the steps as mentioned below:

• Locate the RESET button on the extender. You are likely to find it on the rear panel or the side panel.
• Press and hold the RESET button for about 10 seconds or until the lights on the device don’t flash altogether. Once that happens, release the RESET button and allow some time for the extender to reboot.
• Once the extender reboots, you can reconfigure the network settings once again to start using the internet seamlessly.